LC Type Roots Oil Pump

LC Roots Pump Features:

High efficiency: The LC Roots pump adopts a double cam design, which rotates smoothly and has no pulsation when transferring the medium, which can effectively improve work efficiency. At the same time, since there are no moving contacts in the pump chamber, energy loss can be reduced, making it more energy efficient.

Low noise: Since there is no contact friction between metal and metal inside the LC Roots pump, the noise is low and it is suitable for environments with high noise requirements.

No pollution: The internal design of the LC Roots pump is a sealed structure, and the pump cavity is completely isolated from the outside world, which can effectively prevent the medium in the pump cavity from polluting the external environment.

Can adapt to a wide range of pressure: LC Roots pump can adapt to a higher pressure range and can be used to transport high-pressure media.

Suitable for transporting a variety of media: LC Roots pump can transport a variety of media, including gas, liquid and solid particle mixtures.

Easy maintenance: LC Roots pump has a simple structure and is easy to maintain. It usually only requires regular inspection and replacement of lubricating oil.

LC Roots Pump Application Areas:

Petrochemical industry: used for the transportation of crude oil and asphalt, as well as the treatment and transportation of liquids and gases during the refining process.

Environmental engineering: used for wastewater treatment, sewage treatment, sludge transportation and treatment.

Electric power industry: used in environmental protection equipment such as flue gas desulfurization, dust removal, and waste gas treatment.

Food industry: For example, the transportation of liquids such as beer, beverages, and fruit juice, as well as the stirring, stirring, and transportation in the production process of dairy products.

Pharmaceutical industry: used for conveying, mixing, and separating liquids and powders in pharmaceutical processes.

Pulp and paper products industry: used for conveying pulp and stirring liquid and solid materials.

Glass industry: used for conveying and stirring glass melt.

Industrial vacuum system: A high-power industrial vacuum system used for vacuum pumps.

Automotive industry: Used for exhaust bubble pumps in automotive exhaust treatment equipment.

Metallurgical industry: used for conveying and stirring various liquid and solid materials in metallurgical processes.

The main components of LC Roots pump are:

Pump Casing: The pump body is the main body of a Roots pump, usually made of cast iron or stainless steel. The interior of the pump body contains one or more rotor cavities for housing the rotors.

Rotors: LC Roots pumps typically contain two rotors that mesh and rotate to create motion to pump and compress gas. The rotor is usually made of special alloy steel and connected by a shaft.

Suction port and discharge port: The suction port and discharge port of the Roots pump are used to enter and discharge gas respectively. The gas enters the rotor cavity through the suction port and is then extracted through the exhaust port.

Side Plates: The side plates are located on both sides of the pump body and are used to seal the rotor cavity. The side plates are usually made of cast iron or stainless steel and are secured with seals and bolts.

Gear Clearance: There is a gear clearance between the rotor and the pump body in the Roots pump, which is used to form a sealing cavity. This gap ensures that there is no direct contact between the rotors and allows for smooth flow of gas.

Pressure balance hole: used to balance the gas pressure inside the Roots pump to prevent wear and failure of the rotor due to excessive pressure.

Oil leakage hole: A small amount of lubricating oil may leak out of the Roots pump during operation. The oil leakage hole is used to discharge the leakage oil in the pump body.

Pump shaft: The pump shaft provides the force for the rotation of the rotor and supports the pump body and rotor through bearings. Pump shafts are usually made of alloy steel, which has good wear resistance and strength.

In addition to the above main components, LC Roots pumps can also be equipped with auxiliary equipment such as air inlet filters, exhaust pipes, cooling devices, etc. to meet specific application needs.