| Quantity: | |
|---|---|
| PDF Export | |
The axial piston high-pressure pump is a new type of axial piston pump manufactured based on the principle of axial piston pump and new materials. It realizes the use of flowing liquid as the lubricating medium, eliminates the lubricating oil tank of traditional piston pumps, avoids leakage pollution of flowing liquid, and is suitable for transfer low viscosity liquids.
Performance Parameter
working pressure | 8Mpa |
Flow rate | 0.3～89m³/h |
Circulation medium | Low viscosity liquid without solid particles |
Max Head | 1000m |
Working medium temperature | 2℃～55℃ |
ambient temperature | 2℃～55℃ |
Storage temperature | 40℃～70℃ |
texture of material | 2205 duplex stainless steel, 2507 super duplex stainless steel, and PEEK polymer materials |
Feature:
Compact structure and high efficiency: Compared with other forms of pumps with the same flow rate and pressure, it has a smaller volume and lighter weight; Extremely efficient, energy-saving, low operating costs, green and environmentally friendly;
Easy installation: It can be directly installed on motors or internal combustion engines, especially suitable for installation sites that are sensitive to space requirements;
High pressure: Continuous working pressure of 8Mpa, peak pressure can reach 10Mpa;
Small pulse and low noise: The pulse during operation is much smaller than other forms of pumps. The more pistons there are, the smaller the pulse, the more coherent the work is, the smaller the vibration, and the lower the noise;
Long service life: The materials used are ultra wear-resistant and corrosion-resistant stainless steel and PEEK materials, and the product's service life can reach over 8000 hours;
Easy to use: Integrated backwash valve simplifies the design of reverse osmosis membrane system, saving space and cost;
Maintenance free: using medium water lubrication, no need to use lubricating oil, eliminating daily maintenance and oil leakage pollution hazards, green and environmentally friendly;
Application scenarios: Widely used in fields such as zero emissions, landfill leachate, seawater desalination, and coal mine wastewater.
Application Field:
Zero discharge of wastewater
Garbage leachate
Desalination of seawater
Desulfurization and desalination
drilling platform
Fire fighting system spray treatment
High pressure cleaning and other fields.
Equipment Selection Table
Model | Speed (rpm) | Flow (m3/h) | Speed (rpm) | Continuous export Maximum pressure (Bar) | Typical flow power @80Bar(KW) | Weight (Kg) |
HP0.6 | 3000 | 0.61 | 700～3450 | 80 | 2.2 | 3.7 |
HP0.8 | 3000 | 0.82 | 700～3450 | 80 | 3.0 | 3.7 |
HP1.0 | 3000 | 1.01 | 700～3450 | 80 | 3.0 | 3.7 |
HP1.7 | 3000 | 1.7 | 700～3450 | 80 | 5.5 | 7.8 |
HP2.1 | 3000 | 2.1 | 700～3450 | 80 | 7.5 | 7.8 |
HP2.7 | 3000 | 2.7 | 700～3450 | 80 | 11 | 7.8 |
HP3.5 | 3000 | 3.5 | 700～3450 | 80 | 11 | 7.8 |
HP4.5 | 1500 | 4.5 | 700～1800 | 80 | 15 | 34.5 |
HP5.3 | 1500 | 5.3 | 700～1800 | 80 | 15 | 34.5 |
HP6.3 | 1500 | 6.3 | 700～1800 | 80 | 18.5 | 34.5 |
HP7.2 | 1500 | 7.2 | 700～1800 | 80 | 22 | 34.5 |
HP8.2 | 1500 | 8.2 | 700～1800 | 80 | 22 | 34.5 |
HP11 | 1500 | 11 | 700～1500 | 80 | 30 | 52 |
HP13.5 | 1500 | 13.5 | 700～1500 | 80 | 37 | 52 |
HP17.5 | 1500 | 17.5 | 700～1500 | 80 | 55 | 52 |
HP0.6-1.0 Pump External Dimensions
| Plunger pump model | DHP0.6 to DHP1.0 |
Entrance interface | G1/2，Deep 13mm |
Export interface | G1/2，Deep 13mm |
HP1.7-3.5 Pump External Dimensions
Plunger pump model | DHP1.7 to DHP3.5 |
Entrance interface | G3/4，Deep 18mm |
Export interface | G3/4，Deep 18mm |
HP4.5-8.2 Pump External Dimensions
Plunger pump model | HP4.5 to HP8.2 |
Entrance interface | M42 ×1.5，Deep 22mm |
Export interface | M42 ×1.5，Deep 22mm |
HP11-17.5 Pump External Dimensions
Plunger pump model | HP11 to HP17.5 |
Entrance interface | M52 ×1.5，Deep 22mm |
Export interface | M52 ×1.5，Deep 22mm |
The axial piston high-pressure pump is a new type of axial piston pump manufactured based on the principle of axial piston pump and new materials. It realizes the use of flowing liquid as the lubricating medium, eliminates the lubricating oil tank of traditional piston pumps, avoids leakage pollution of flowing liquid, and is suitable for transfer low viscosity liquids.
Performance Parameter
working pressure | 8Mpa |
Flow rate | 0.3～89m³/h |
Circulation medium | Low viscosity liquid without solid particles |
Max Head | 1000m |
Working medium temperature | 2℃～55℃ |
ambient temperature | 2℃～55℃ |
Storage temperature | 40℃～70℃ |
texture of material | 2205 duplex stainless steel, 2507 super duplex stainless steel, and PEEK polymer materials |
Feature:
Compact structure and high efficiency: Compared with other forms of pumps with the same flow rate and pressure, it has a smaller volume and lighter weight; Extremely efficient, energy-saving, low operating costs, green and environmentally friendly;
Easy installation: It can be directly installed on motors or internal combustion engines, especially suitable for installation sites that are sensitive to space requirements;
High pressure: Continuous working pressure of 8Mpa, peak pressure can reach 10Mpa;
Small pulse and low noise: The pulse during operation is much smaller than other forms of pumps. The more pistons there are, the smaller the pulse, the more coherent the work is, the smaller the vibration, and the lower the noise;
Long service life: The materials used are ultra wear-resistant and corrosion-resistant stainless steel and PEEK materials, and the product's service life can reach over 8000 hours;
Easy to use: Integrated backwash valve simplifies the design of reverse osmosis membrane system, saving space and cost;
Maintenance free: using medium water lubrication, no need to use lubricating oil, eliminating daily maintenance and oil leakage pollution hazards, green and environmentally friendly;
Application scenarios: Widely used in fields such as zero emissions, landfill leachate, seawater desalination, and coal mine wastewater.
Application Field:
Zero discharge of wastewater
Garbage leachate
Desalination of seawater
Desulfurization and desalination
drilling platform
Fire fighting system spray treatment
High pressure cleaning and other fields.
Equipment Selection Table
Model | Speed (rpm) | Flow (m3/h) | Speed (rpm) | Continuous export Maximum pressure (Bar) | Typical flow power @80Bar(KW) | Weight (Kg) |
HP0.6 | 3000 | 0.61 | 700～3450 | 80 | 2.2 | 3.7 |
HP0.8 | 3000 | 0.82 | 700～3450 | 80 | 3.0 | 3.7 |
HP1.0 | 3000 | 1.01 | 700～3450 | 80 | 3.0 | 3.7 |
HP1.7 | 3000 | 1.7 | 700～3450 | 80 | 5.5 | 7.8 |
HP2.1 | 3000 | 2.1 | 700～3450 | 80 | 7.5 | 7.8 |
HP2.7 | 3000 | 2.7 | 700～3450 | 80 | 11 | 7.8 |
HP3.5 | 3000 | 3.5 | 700～3450 | 80 | 11 | 7.8 |
HP4.5 | 1500 | 4.5 | 700～1800 | 80 | 15 | 34.5 |
HP5.3 | 1500 | 5.3 | 700～1800 | 80 | 15 | 34.5 |
HP6.3 | 1500 | 6.3 | 700～1800 | 80 | 18.5 | 34.5 |
HP7.2 | 1500 | 7.2 | 700～1800 | 80 | 22 | 34.5 |
HP8.2 | 1500 | 8.2 | 700～1800 | 80 | 22 | 34.5 |
HP11 | 1500 | 11 | 700～1500 | 80 | 30 | 52 |
HP13.5 | 1500 | 13.5 | 700～1500 | 80 | 37 | 52 |
HP17.5 | 1500 | 17.5 | 700～1500 | 80 | 55 | 52 |
HP0.6-1.0 Pump External Dimensions
| Plunger pump model | DHP0.6 to DHP1.0 |
Entrance interface | G1/2，Deep 13mm |
Export interface | G1/2，Deep 13mm |
HP1.7-3.5 Pump External Dimensions
Plunger pump model | DHP1.7 to DHP3.5 |
Entrance interface | G3/4，Deep 18mm |
Export interface | G3/4，Deep 18mm |
HP4.5-8.2 Pump External Dimensions
Plunger pump model | HP4.5 to HP8.2 |
Entrance interface | M42 ×1.5，Deep 22mm |
Export interface | M42 ×1.5，Deep 22mm |
HP11-17.5 Pump External Dimensions
Plunger pump model | HP11 to HP17.5 |
Entrance interface | M52 ×1.5，Deep 22mm |
Export interface | M52 ×1.5，Deep 22mm |