Availability: | |
---|---|
Quantity: | |
PDF Export | |
CPN type acid-base pump is a single-stage single suction horizontal centrifugal pump, which is not easy to block, has high efficiency, low energy consumption, and generates negative pressure during operation. Can transport media containing solid particles and easy to crystallize.
Chlor alkali and soda ash industry;
Medicine, fertilizers, pesticides, coal chemical industry;
Petrochemical, chemical fiber, paper industry, dye industry, environmental engineering, and water treatment systems.
Transport medium: If the solid content is less than 35% (volume ratio) and the temperature is below 150℃, cooling water must be added to the double end face machine seal.
When the density of the pumped medium is greater than 1.2 or the viscosity is greater than water, a motor with the corresponding output power is required.
Flow: 1 6-400M3/H
Head: 5-125M
Working pressure: ≤ 1 6Mpa
Operating Temperature: -20~+150 ℃
When repairing the impeller and shaft seal, this rear door type pump does not need to disassemble the pipelines and electric components connected to the pump body. Equipped with precision machined high steel pump shafts and bearings lubricated with thin oil; The oil level of the bearing body is measured using an oil dipstick, which is reliable, practical, and easy to operate.
The pump body is cast with support feet, which can withstand any load from the pipeline and directly transmit it to the foundation. This way, the pump rotor will not bend due to the load borne by the pump, ensuring excellent service life of the bearings and mechanical seals.
The rotation direction of the pump: Look at the pump from the drive end and rotate clockwise.
The power supporting system adopts YB explosion-proof motor with Y-type ordinary motor.
High efficiency, low energy consumption, and excellent cavitation performance.
Wide work scope and strong adaptability.
Can transport media containing solid particles and easy to crystallize. Good corrosion resistance, with an open impeller structure that is not easily clogged.
The pump is designed with an axial clearance adjustment mechanism to reduce the impact of wear on pump performance. High temperature resistance, cooling water needs to be added during use.
Filler seal and single and double end face mechanical seal; There are internal and external installation, as well as balanced and unbalanced structures.
ZG1Cr18Ni9, ZG1Cr18Ni9Ti, ZGOCr18Ni12MO2Ti, ZG1Cr18Ni12MO2Ti, ZG00Cr14Ni14Si4, ZG00Cr18Ni10, ZGCr28 ZG1Cr18Mn13MO2 uN , 316,316L and Monelt etc.
CPN Type | (Speed)n=2950r/min | (Speed)n=1450r/min | ||||||||
Flow | Head | Power | Efficienc | (NPSH)r | FLow | Head | Power | Efficiency | (NPSH)r | |
m3/h | m | kW | % | m | m3/h | m | kW | % | m | |
CPN25-25-125 | 3.2 | 20 | 1.5 | 35 | 5.0 | 1.6 | 5 | 0.55 | 30 | 2.5 |
CPN25-25-160 | 3.2 | 32 | 3 | 30 | 3.5 | 1.6 | 8 | 0.55 | 25 | 1.8 |
CPN25-25-200 | 3.2 | 50 | 5.5 | 27 | 4.0 | 1.6 | 12.5 | 0.75 | 22 | 2.0 |
CPN25-25-250 | 3.2 | 80 | 7.5 | 17 | 4.5 | 1.6 | 20 | 1.5 | 13 | 2.2 |
CPN40-32-125 | 6.3 | 20 | 2.2 | 52 | 4.0 | 3.2 | 5 | 0.55 | 47 | 2.0 |
CPN40-32-160 | 6.3 | 32 | 3 | 36 | 3.5 | 3.2 | 8 | 0.75 | 31 | 1.8 |
CPN40-32-200 | 6.3 | 50 | 5.5 | 34 | 3.5 | 3.2 | 12.5 | 0.75 | 29 | 1.8 |
CPN40-32-250 | 6.3 | 80 | 7.5 | 26 | 4.5 | 3.2 | 20 | 1.5 | 21 | 2.2 |
CPN50-32-125 | 12.5 | 20 | 3 | 51 | 2.0 | 6.3 | 5 | 0.55 | 45 | 1.0 |
CPN50-32-160 | 12.5 | 32 | 4 | 46 | 2.0 | 6.3 | 8 | 0.75 | 40 | 1.0 |
CPN50-32-200 | 12.5 | 50 | 7.5 | 39 | 2.0 | 6.3 | 12.5 | 1.1 | 33 | 1.0 |
CPN50-32-250 | 12.5 | 80 | 15 | 33 | 2.0 | 6.3 | 20 | 2.2 | 27 | 1.0 |
CPN65-50-125 | 25 | 20 | 3 | 62 | 2.0 | 12.5 | 5 | 0.55 | 55 | 1.2 |
CPN65-50-160 | 25 | 32 | 5.5 | 57 | 2.0 | 12.5 | 8 | 1.1 | 51 | 1.2 |
CPN65-40-200 | 25 | 50 | 11 | 52 | 2.0 | 12.5 | 12.5 | 1.5 | 46 | 1.2 |
CPN65-40-250 | 25 | 80 | 18.5 | 46 | 2.0 | 12.5 | 20 | 3 | 39 | 1.2 |
CPN65-40-315 | 25 | 125 | 30 | 39 | 2.0 | 12.5 | 32 | 5.5 | 33 | 1.2 |
CPN65-40-400 | 12.5 | 50 | 18.5 | 27 | 1.2 | |||||
CPN80-65-125 | 50 | 20 | 5.5 | 69 | 2.4 | 25 | 5 | 1.1 | 64 | 1.4 |
CPN80-65-160 | 50 | 32 | 11 | 67 | 2.4 | 25 | 8 | 1.5 | 62 | 1.4 |
CPN80-50-200 | 50 | 50 | 15 | 63 | 2.4 | 25 | 12.5 | 2.2 | 57 | 1.4 |
CPN80-50-250 | 50 | 80 | 30 | 57 | 2.4 | 25 | 20 | 4 | 53 | 1.4 |
CPN80-50-315 | 50 | 125 | 45 | 48 | 2.4 | 25 | 32 | 7.5 | 43 | 1.4 |
CPN80-50-400 | 25 | 50 | 18.5 | 37 | 1.4 | |||||
CPN100-80-125 | 100 | 20 | 11 | 77 | 4.5 | 50 | 5 | 1.5 | 74 | 1.7 |
CPN100-80-160 | 100 | 32 | 18.5 | 73 | 4.3 | 50 | 8 | 3 | 69 | 1.7 |
CPN100-65-200 | 100 | 50 | 37 | 72 | 3.9 | 50 | 12.5 | 4 | 68 | 1.7 |
CPN100-65-250 | 100 | 80 | 55 | 68 | 3.6 | 50 | 20 | 5.5 | 65 | 1.7 |
CPN100-65-315 | 50 | 32 | 11 | 58 | 1.7 | |||||
CPN100-65-400 | 50 | 50 | 30 | 29 | 1.7 | |||||
CPN125-100-200 | 200 | 50 | 45 | 77 | 4.5 | 100 | 12.5 | 7.5 | 73 | 2.2 |
CPN125-100-250 | 200 | 80 | 75 | 75 | 4.5 | 100 | 20 | 11 | 72 | 2.2 |
CPN125-100-315 | 100 | 32 | 18.5 | 68 | 2.2 | |||||
CPN125-100-400 | 100 | 50 | 30 | 60 | 2.2 | |||||
CPN150-125-250 | 200 | 20 | 18.5 | 77 | 3.2 | |||||
CPN150-125-315 | 200 | 32 | 30 | 75 | 3.2 | |||||
CPN150-125-400 | 200 | 50 | 45 | 70 | 3.2 | |||||
CPN150-125-450 | 200 | 65 | 75 | 66 | 3.2 | |||||
CPN200-150-250 | 400 | 20 | 37 | 81 | 4.5 | |||||
CPN200-150-315 | 400 | 32 | 55 | 79 | 4.5 | |||||
CPN200-150-400 | 400 | 50 | 90 | 78 | 4.5 |
CPN type acid-base pump is a single-stage single suction horizontal centrifugal pump, which is not easy to block, has high efficiency, low energy consumption, and generates negative pressure during operation. Can transport media containing solid particles and easy to crystallize.
Chlor alkali and soda ash industry;
Medicine, fertilizers, pesticides, coal chemical industry;
Petrochemical, chemical fiber, paper industry, dye industry, environmental engineering, and water treatment systems.
Transport medium: If the solid content is less than 35% (volume ratio) and the temperature is below 150℃, cooling water must be added to the double end face machine seal.
When the density of the pumped medium is greater than 1.2 or the viscosity is greater than water, a motor with the corresponding output power is required.
Flow: 1 6-400M3/H
Head: 5-125M
Working pressure: ≤ 1 6Mpa
Operating Temperature: -20~+150 ℃
When repairing the impeller and shaft seal, this rear door type pump does not need to disassemble the pipelines and electric components connected to the pump body. Equipped with precision machined high steel pump shafts and bearings lubricated with thin oil; The oil level of the bearing body is measured using an oil dipstick, which is reliable, practical, and easy to operate.
The pump body is cast with support feet, which can withstand any load from the pipeline and directly transmit it to the foundation. This way, the pump rotor will not bend due to the load borne by the pump, ensuring excellent service life of the bearings and mechanical seals.
The rotation direction of the pump: Look at the pump from the drive end and rotate clockwise.
The power supporting system adopts YB explosion-proof motor with Y-type ordinary motor.
High efficiency, low energy consumption, and excellent cavitation performance.
Wide work scope and strong adaptability.
Can transport media containing solid particles and easy to crystallize. Good corrosion resistance, with an open impeller structure that is not easily clogged.
The pump is designed with an axial clearance adjustment mechanism to reduce the impact of wear on pump performance. High temperature resistance, cooling water needs to be added during use.
Filler seal and single and double end face mechanical seal; There are internal and external installation, as well as balanced and unbalanced structures.
ZG1Cr18Ni9, ZG1Cr18Ni9Ti, ZGOCr18Ni12MO2Ti, ZG1Cr18Ni12MO2Ti, ZG00Cr14Ni14Si4, ZG00Cr18Ni10, ZGCr28 ZG1Cr18Mn13MO2 uN , 316,316L and Monelt etc.
CPN Type | (Speed)n=2950r/min | (Speed)n=1450r/min | ||||||||
Flow | Head | Power | Efficienc | (NPSH)r | FLow | Head | Power | Efficiency | (NPSH)r | |
m3/h | m | kW | % | m | m3/h | m | kW | % | m | |
CPN25-25-125 | 3.2 | 20 | 1.5 | 35 | 5.0 | 1.6 | 5 | 0.55 | 30 | 2.5 |
CPN25-25-160 | 3.2 | 32 | 3 | 30 | 3.5 | 1.6 | 8 | 0.55 | 25 | 1.8 |
CPN25-25-200 | 3.2 | 50 | 5.5 | 27 | 4.0 | 1.6 | 12.5 | 0.75 | 22 | 2.0 |
CPN25-25-250 | 3.2 | 80 | 7.5 | 17 | 4.5 | 1.6 | 20 | 1.5 | 13 | 2.2 |
CPN40-32-125 | 6.3 | 20 | 2.2 | 52 | 4.0 | 3.2 | 5 | 0.55 | 47 | 2.0 |
CPN40-32-160 | 6.3 | 32 | 3 | 36 | 3.5 | 3.2 | 8 | 0.75 | 31 | 1.8 |
CPN40-32-200 | 6.3 | 50 | 5.5 | 34 | 3.5 | 3.2 | 12.5 | 0.75 | 29 | 1.8 |
CPN40-32-250 | 6.3 | 80 | 7.5 | 26 | 4.5 | 3.2 | 20 | 1.5 | 21 | 2.2 |
CPN50-32-125 | 12.5 | 20 | 3 | 51 | 2.0 | 6.3 | 5 | 0.55 | 45 | 1.0 |
CPN50-32-160 | 12.5 | 32 | 4 | 46 | 2.0 | 6.3 | 8 | 0.75 | 40 | 1.0 |
CPN50-32-200 | 12.5 | 50 | 7.5 | 39 | 2.0 | 6.3 | 12.5 | 1.1 | 33 | 1.0 |
CPN50-32-250 | 12.5 | 80 | 15 | 33 | 2.0 | 6.3 | 20 | 2.2 | 27 | 1.0 |
CPN65-50-125 | 25 | 20 | 3 | 62 | 2.0 | 12.5 | 5 | 0.55 | 55 | 1.2 |
CPN65-50-160 | 25 | 32 | 5.5 | 57 | 2.0 | 12.5 | 8 | 1.1 | 51 | 1.2 |
CPN65-40-200 | 25 | 50 | 11 | 52 | 2.0 | 12.5 | 12.5 | 1.5 | 46 | 1.2 |
CPN65-40-250 | 25 | 80 | 18.5 | 46 | 2.0 | 12.5 | 20 | 3 | 39 | 1.2 |
CPN65-40-315 | 25 | 125 | 30 | 39 | 2.0 | 12.5 | 32 | 5.5 | 33 | 1.2 |
CPN65-40-400 | 12.5 | 50 | 18.5 | 27 | 1.2 | |||||
CPN80-65-125 | 50 | 20 | 5.5 | 69 | 2.4 | 25 | 5 | 1.1 | 64 | 1.4 |
CPN80-65-160 | 50 | 32 | 11 | 67 | 2.4 | 25 | 8 | 1.5 | 62 | 1.4 |
CPN80-50-200 | 50 | 50 | 15 | 63 | 2.4 | 25 | 12.5 | 2.2 | 57 | 1.4 |
CPN80-50-250 | 50 | 80 | 30 | 57 | 2.4 | 25 | 20 | 4 | 53 | 1.4 |
CPN80-50-315 | 50 | 125 | 45 | 48 | 2.4 | 25 | 32 | 7.5 | 43 | 1.4 |
CPN80-50-400 | 25 | 50 | 18.5 | 37 | 1.4 | |||||
CPN100-80-125 | 100 | 20 | 11 | 77 | 4.5 | 50 | 5 | 1.5 | 74 | 1.7 |
CPN100-80-160 | 100 | 32 | 18.5 | 73 | 4.3 | 50 | 8 | 3 | 69 | 1.7 |
CPN100-65-200 | 100 | 50 | 37 | 72 | 3.9 | 50 | 12.5 | 4 | 68 | 1.7 |
CPN100-65-250 | 100 | 80 | 55 | 68 | 3.6 | 50 | 20 | 5.5 | 65 | 1.7 |
CPN100-65-315 | 50 | 32 | 11 | 58 | 1.7 | |||||
CPN100-65-400 | 50 | 50 | 30 | 29 | 1.7 | |||||
CPN125-100-200 | 200 | 50 | 45 | 77 | 4.5 | 100 | 12.5 | 7.5 | 73 | 2.2 |
CPN125-100-250 | 200 | 80 | 75 | 75 | 4.5 | 100 | 20 | 11 | 72 | 2.2 |
CPN125-100-315 | 100 | 32 | 18.5 | 68 | 2.2 | |||||
CPN125-100-400 | 100 | 50 | 30 | 60 | 2.2 | |||||
CPN150-125-250 | 200 | 20 | 18.5 | 77 | 3.2 | |||||
CPN150-125-315 | 200 | 32 | 30 | 75 | 3.2 | |||||
CPN150-125-400 | 200 | 50 | 45 | 70 | 3.2 | |||||
CPN150-125-450 | 200 | 65 | 75 | 66 | 3.2 | |||||
CPN200-150-250 | 400 | 20 | 37 | 81 | 4.5 | |||||
CPN200-150-315 | 400 | 32 | 55 | 79 | 4.5 | |||||
CPN200-150-400 | 400 | 50 | 90 | 78 | 4.5 |